Indy Racer
Body: Fiberglass
Frame: 1 1/2" x 2" x .120 rectangular steel tubing. All MIG welded. Urethane shock absorbers are mounted to the frame. The fiberglass body rest on the urethane shock absorbers.
Bumper: 4" spring steel bumper mounted to the urethane shock absorbers.
Engine: Honda air cooled engines with centrifugal wet clutch. Available engines are8hp GX240K1, 9hp GX270 K1, 13 hp
Drive belt: Gates Poly Chain GT
Brake type: Disk brakes
Linkages: Gas and brake rods, solid steel rods with metal linkages.
Steering; 3/4" tie rods, 1/2" tie rod ends.
Rear axle: 11/4" live axle (both tires drive) with tapered ends (no keyways to wear out). Our axles are made of the same chrome alloy used for hydralic rams.
Rear hub: Rear hubs are made from solid aluminum stock. CNC machined with taper for press fit onto axle. Wheel studs for quick tire changes.
Front spindle: 1" steel spindle and needle bearing caps.
Front hub: Front hubs are machined from solid aluminum stock. CNC machined for tapered roller bearings or sealed ball bearing. Wheel studs for quick tire change.
Tires: 8" slicks with tube.
Rims: 8" spun amluminum or steel rims.
Frame: 1 1/2" x 2" x .120 rectangular steel tubing. All MIG welded. Urethane shock absorbers are mounted to the frame. The fiberglass body rest on the urethane shock absorbers.
Bumper: 4" spring steel bumper mounted to the urethane shock absorbers.
Engine: Honda air cooled engines with centrifugal wet clutch. Available engines are8hp GX240K1, 9hp GX270 K1, 13 hp
Drive belt: Gates Poly Chain GT
Brake type: Disk brakes
Linkages: Gas and brake rods, solid steel rods with metal linkages.
Steering; 3/4" tie rods, 1/2" tie rod ends.
Rear axle: 11/4" live axle (both tires drive) with tapered ends (no keyways to wear out). Our axles are made of the same chrome alloy used for hydralic rams.
Rear hub: Rear hubs are made from solid aluminum stock. CNC machined with taper for press fit onto axle. Wheel studs for quick tire changes.
Front spindle: 1" steel spindle and needle bearing caps.
Front hub: Front hubs are machined from solid aluminum stock. CNC machined for tapered roller bearings or sealed ball bearing. Wheel studs for quick tire change.
Tires: 8" slicks with tube.
Rims: 8" spun amluminum or steel rims.
22003