Aquafountain
The Aquafountain is an AQUATON® spray feature which is suitable for shallow pools and Spraypark applications with no standing water. There are no moving parts and simple interaction for the players is with the water flow alone.Water is pumped into the centre column and fills the upper reservoir until it pours over the many weirs to create a series of shower flows. This will create a circular waterfall effect below the unit. Water flow is at the operator's discretion. As the water volume is increased, the size of the shower flows increase. The Aquafountain is excellent as a center piece.
Fabricated from schedule 80 solid thermoplastic pipe with a ¼" fiberglass top, the unit is just as strong and much lighter than steel, offering a lifetime warranty against corrosion. No embedded anchors or complicated foundations are required thus cutting down installation costs.
Installation Details
Aquatons have been designed to simplify installation and reduce construction costs. There are no troublesome embedded anchors.
The unit is simply bolted to the slab over the extended pipe. A flange gasket seals the base and water simply fills the column to the overflow point. Setting the base in location enables drilling anchor holes in place. Expandable stainless steel anchors or stainless threaded rod with chemical set are both acceptable anchoring methods.
After anchors are in place, the base cowling slips over the flange and is fastened in place to create a neat and safe installation with no exposed fasteners.
Width: 96"
Height: 9' 4'
Flow: 400-600 gpm
Spray: 2'
Fabricated from schedule 80 solid thermoplastic pipe with a ¼" fiberglass top, the unit is just as strong and much lighter than steel, offering a lifetime warranty against corrosion. No embedded anchors or complicated foundations are required thus cutting down installation costs.
Installation Details
Aquatons have been designed to simplify installation and reduce construction costs. There are no troublesome embedded anchors.
The unit is simply bolted to the slab over the extended pipe. A flange gasket seals the base and water simply fills the column to the overflow point. Setting the base in location enables drilling anchor holes in place. Expandable stainless steel anchors or stainless threaded rod with chemical set are both acceptable anchoring methods.
After anchors are in place, the base cowling slips over the flange and is fastened in place to create a neat and safe installation with no exposed fasteners.
Width: 96"
Height: 9' 4'
Flow: 400-600 gpm
Spray: 2'
29818