Watertotter
O PIPED IN WATERFEED REQUIRED!The Watertotter is an interactive Watertoy® actuated by the up and down movement of the participants. The unit contains its own pump and does not require a piped-in waterfeed. Each time the unit goes up a waterjet sprays from the handle bars on one side over the opposite participants head. When the unit goes down the opposite side shoots providing an impressive water display.
Excellent for use in shallow pools with depths from 8 inches ( 20 cm ) to 12 inches ( 30 cm ), the unit is easily installed for retrofit application or in new pools by simply bolting to the pool slab. No elaborate footings or embedded anchors are required.
Installation Details
The Watertotter has no piped in water feed and the unit has a self contained pump which simply draws from the pool at the base above the flange.
After the pool slab is complete, the equipment is easily installed by simply setting the unit in place and marking the anchor positions. Holes are drilled and anchors are completed. The unit is ready to go!
Width: 120"
Height: 30"
Flow: 2 gpm
Spray: 20'
Excellent for use in shallow pools with depths from 8 inches ( 20 cm ) to 12 inches ( 30 cm ), the unit is easily installed for retrofit application or in new pools by simply bolting to the pool slab. No elaborate footings or embedded anchors are required.
Installation Details
The Watertotter has no piped in water feed and the unit has a self contained pump which simply draws from the pool at the base above the flange.
After the pool slab is complete, the equipment is easily installed by simply setting the unit in place and marking the anchor positions. Holes are drilled and anchors are completed. The unit is ready to go!
Width: 120"
Height: 30"
Flow: 2 gpm
Spray: 20'
29810