Electric Bumper Boats
With electric power and a "water blaster" squirter your customers will come back for more.
FEATURES
Super Tube
This multi colored tube is a perfect match to our brilliant bumperboat hulls. Built with a Urethane coated fabric it is much lighter than the standard tube fitted to the gasboats.
Fiberglass Hull
This seamless, two piece fiberglass hull comes in an array of colors to choose from. Pick two colors from our extensive color list and we'll build it. Match it up with an optional (standard on Blasterboat) Supertube in your choice of two colors.
Hand rails
Always concerned with safety, we design our products with safety at the top of the design criteria. With this in mind we added the safety handrails to the bumperboat hulls to allow safer, easier access into and out of the bumperboats.
Prop Guard
Our prop guards are designed to allow maximum flow while meeting the safety requirements of all known standards. Built to last in the most corrosive of enviroments. Our prop guards are zinc phospahte coated and then powder coated.
24vdc electric motor
Water Bug (gas), Blaster Boat (electric)
Overall Diameter 72" (182 cm)
Overall Height 40" (101 cm)
Water Line to Prop Guard Depth (GAS) 10" (25.4 cm) (Electric) " cm
Wet Weight (GAS) 217 lb (98 kg) (Electric) 390 lb (177 kg)
Fuel Tank Capacity (Extra Capacity)
1.7 gal (6.4 liters)
Battery Type & Capacity 4 each 6 volt 220 amp.hr.
Charge System / Power Requirements Automatic 24 volt. 115 Vac. 60 Hz 10 amp.
EngineModel Gas Honda BF2A & BF2DX Outboard Motor
Model Electric PMDC
Type Gas BF2A 4-Stroke, side valve, single cylinder 2 hp
BF2DX 4-Stroke, overhead valve, single cylinder 2 hp
Type Electric Continuous Duty 3/4 hp (1118 w), 24 volt, Permanent Magnet
Cooling System Forced Air
Starting System (Gas) Recoil (Electric) Push Button
Lubrication System Splash
Angle of Rotation (Gas) 360° (Electric) 200°
FEATURES
Super Tube
This multi colored tube is a perfect match to our brilliant bumperboat hulls. Built with a Urethane coated fabric it is much lighter than the standard tube fitted to the gasboats.
Fiberglass Hull
This seamless, two piece fiberglass hull comes in an array of colors to choose from. Pick two colors from our extensive color list and we'll build it. Match it up with an optional (standard on Blasterboat) Supertube in your choice of two colors.
Hand rails
Always concerned with safety, we design our products with safety at the top of the design criteria. With this in mind we added the safety handrails to the bumperboat hulls to allow safer, easier access into and out of the bumperboats.
Prop Guard
Our prop guards are designed to allow maximum flow while meeting the safety requirements of all known standards. Built to last in the most corrosive of enviroments. Our prop guards are zinc phospahte coated and then powder coated.
24vdc electric motor
Water Bug (gas), Blaster Boat (electric)
Overall Diameter 72" (182 cm)
Overall Height 40" (101 cm)
Water Line to Prop Guard Depth (GAS) 10" (25.4 cm) (Electric) " cm
Wet Weight (GAS) 217 lb (98 kg) (Electric) 390 lb (177 kg)
Fuel Tank Capacity (Extra Capacity)
1.7 gal (6.4 liters)
Battery Type & Capacity 4 each 6 volt 220 amp.hr.
Charge System / Power Requirements Automatic 24 volt. 115 Vac. 60 Hz 10 amp.
EngineModel Gas Honda BF2A & BF2DX Outboard Motor
Model Electric PMDC
Type Gas BF2A 4-Stroke, side valve, single cylinder 2 hp
BF2DX 4-Stroke, overhead valve, single cylinder 2 hp
Type Electric Continuous Duty 3/4 hp (1118 w), 24 volt, Permanent Magnet
Cooling System Forced Air
Starting System (Gas) Recoil (Electric) Push Button
Lubrication System Splash
Angle of Rotation (Gas) 360° (Electric) 200°
BMP-ELE