Watershooter

NO PIPED IN WATERFEED REQUIRED!
The Watershooter is an interactive Watertoy® which is actuated by cranking the handles. As the wheels are turned the unit sends a pulse of water from the nozzle. The watershooter contains its own pump and does not require a piped-in waterfeed. It can be aimed side to side and up and down. Waterdepth requirements are 8 inches ( 20 cm) to 24 inches ( 60 cm).

The unit is excellent for retrofit or newpool installations by simply bolting to the pool slab. No elaborate footings or embedded anchors are required.

Installation Details
The Watershooter has no piped in water feed and the unit has a self contained pump which simply draws from the pool at the base above the flange.

After the pool slab is complete, the equipment is easily installed by simply setting the unit in place and marking the anchor positions. Holes are drilled and anchors are completed. The unit is ready to go!

Available with Coin Operation (29812B) or with piped in water supply needed (29812C).

Width: 20"
Height: 40"
Flow: 2 gpm
Spray: 20'
29812